Industrial Sectional Overhead Garage Door

Telephone

+8617538627299

Industrial Overhead Door Your location： Hmoe>> Industrial Overhead Door>>text

prevnext

category： Industrial Overhead Door
...

Service Hotline： +8617538627299

Product Details
contact us

Instructions:
Industrial door nice looking surface, strong panel, easy operating, use for different factory internal and external doors.
small door or small window is available, make door internal bright light.
standard door panel with anti-pinch hand protection
between door panel and hange ,both have anti-pinch hand design to increase safety performance
Door Panel material
door panel thickness 40mm and 50mm for choice, It is made of one-time compression molding of foaming polyurethane with thermal insulation material. It has the advantages of anti-UV, anti-aging, not easy to crack and not easy to fade. Whether it is cold or cool, it can provide good insulation, heat insulation and sound insulation.
Durable accessories ensure safe operation of the door
Safe special porous angle iron, wire rope, aluminum rope wheel, torsion spring, torsion spring fixing plate, roller and other accessories ensure the safe operation of the door body.

Different Opening Methods and safety precautions
After the industrial door is closed, the internal latch device has an anti-theft protection function. Specially designed torsion spring anti-fracture and tripod with emergency knife edge and safe running air bag ensure safe operation of the door. The use of the door opener can prevent the steel wire rope winding problem caused by the wrong angle of the door body.
Equipped with a dedicated control system and motor and accessories such as thickened 3-inch rails and rails, the door can be operated safely.
Package
Wooden case pakage to ensure safety transportation
Good sealing property
The side of the door body is provided with a sealing strip and an aluminum alloy frame and an airbag strip installed at the bottom of the door. It has good elasticity and can effectively resist the erosion of sand, dust and rain under the premise of ensuring safety, and make up for the ground. Flat defect.
Lifting Methods
According different factory and building top space, door panel have 3 different lifting methods
1：Standard lifting
55cm top headroom ≥550MM
2： High lifting(when door vertical lifting half or some panel door panel just overhead)
top headroom ≥1500MM
3：Vertical Lifting
door clear height +600MM
Industrial door performance
1、 High quality materials, good insulation effect
The door body is made of double-layer high-quality galvanized steel plate, embossed and pressed, filled with fireproof and heat-insulating materials in the middle, featuring high strength, sturdy and durable, good thermal insulation and sound insulation effect, and the surface is sprayed to effectively prevent corrosion.
2、Reliable anti-theft performance
Industrial doors are equipped with anti-smashing devices to protect your property.
3、Adjustable pulley bracket
The uniquely designed pulley bracket system makes it easy to adjust the bearings and pulleys to ensure smooth and noise-free door lift.
4、Anti-falling protection
The anti-drop protection device installed at the two ends of the door body effectively prevents the safety of personnel and articles when the door body accidentally falls.
Technical Parameters
Door panel making size：door panel width=door clear width+60mm，door panel height=door clear height
1、Door body
（1）The door panel is made of double-layer hot-dip galvanized steel sheet with high-density rigid polyurethane in the middle.
Foamed material, uniform columnar stripe on the surface; sprayed and baked at high temperature
Concentrate on production to increase aesthetics and improve corrosion resistance and durability
（2）door panel thickness 42mm or 50mm ,internal and external surface both color steel plate
（3）Door panel type: ordinary door panel; anti-pinch hand door panel
（4） Hot-dip galvanized sheet (color steel plate)T: 0.326、0.35、0.376、0.426
（5）Hot dip galvanized sheet standard color is white; (customer can customize)
（6）The thermal conductivity is not more than 0.033W/S;
（7） Lifting door wind pressure resistance performance level 3; water tightness performance level 3; air tightness performance level 2; door leaf material flame retardant performance B2 level.

2.Motor
（1）Motor Drive Voltage：220V or 380V AC（+6%，-10%），F：50Hz；
（2）Power:800W
（3）Power output rated torque:50N.M
（4）Transmission mode: shaft drive or side chain drive;
（5）Thermal protection operating temperature: 140 degrees Celsius;
（6）Operating speed: 8m/min adjustable;
（7）Working temperature -20~+60 degrees Celsius;
（8）The industrial door opener is equipped with a small door safety protection switch to ensure that if the lifting door is running
Open the small door and the door will stop.
3. Hardware
（1）guide rail：width 2inch（51mm）or 3inch（76mm）， made of by T=2mmor 3mm T GL plate

（2）side guide rail：Made of 2.5mm thick hot-dip galvanized steel, the track is mounted on the auxiliary rail to improve the track strenth

（3）hardware：Made of 2.5-5mm hot-dip galvanized steel sheet, all hardware (including rails, auxiliary rails, hinges) are carefully produced by spray-coating, high-temperature baking, etc., which enhances corrosion resistance, durability and aesthetics.
（4）Torsion spring: the material is T117, and the working life is up to 50,000 working cycles;
（5）Rope wheel: high-strength zinc-aluminum alloy die-casting;
（6）Wire rope: 5mm high quality steel wire.
4. Safety Protection
（1）Anti-torsion spring breaking device: ensure that the door plate will be pulled by the wire rope when the torsion spring breaks, no longer slip, avoid accidents
（2）Fall protection device: When the wire rope breaks, the blade is caught by the edge of the fall arresting gantry to prevent the door from falling. The reaction time is 0.2 seconds;
（3）Anti-collision device: The installed anti-collision column protects when the car or object hits the sides of the door.
（4）Buffer: Prevents the door from being pulled out of the track when the door is running upwards to ensure safe use;
（5）Bottom protection device (airbag): When the door is running downwards, once a person, vehicle or other obstacle comes into contact with the airbag, the door will stop running or reverse running back to full open state (Belgian manufacturing) );
（6）Small door protection switch: The industrial door opening machine is equipped with a small door safety protection switch to ensure that if the small door is opened during the operation of the lifting door, the door will stop running.
Door opening size and motor configuration requirements
Door opening：
Door buttress（w/o motor）：≥15cm；Door buttress（with motor）：≥45cm；

Motor using range：
220V：≤18m2--KG50，18-30m2--KG60
380V：≤24m2以内--KG50S，24-30m2--KG75S，30-45m2--KG120S
Installation Problem Solving Solutions
1、door up and down button not working well and with noise
（1）The problem may be that the gap between the door panels and the rails on both sides of the door is not wide enough.
（2）The hinge installation is not vertical, causing the roller to rub the track and affect the normal operation of the door.
（3）The wire rope door plates on both sides are different in length, which causes the door body to be skewed and difficult to open.
2、door panel cannot go up adn down
（1）It is possible that the torsion spring ratio is incorrect and the door panel is overweight.
（2）The torsion spring is installed in the wrong direction.
（3）The door panel installation is skewed.