Cold storage chain door installation drawing

Preparation

1. Confirm the installation location: determine the position of the chain door of the cold storage according to the actual needs, and ensure that the size of the door opening matches the size of the door body.

2. Prepare installation tools: including conventional installation tools such as electric drills, screwdrivers, and wrenches.

3. Check the door body and accessories: check whether the door body and hardware accessories are intact and whether the models match

Installation Steps

1. Install the door frame:

(1) According to the ground elevation, determine the installation position of the door frame.

(2) Use expansion bolts to secure the door frame to the wall.

(3) Make sure the door frame is vertical and horizontal, and calibrate it with a level.

2. Install the door body:

(1) Put the door body into the door frame and make sure that the door body fits tightly with the door frame.

(2) Use screws or welding to fix the door body with the door frame.

3. Install chain and transmission device:

(1) Fix the chain on the door body to ensure that the chain is flat and free of twisting.

(2) Install transmission devices, such as motors, reducers, guide rails, etc., to ensure the normal operation of the transmission system.

4. Installation and control system: including electric control box, sensors, etc., to ensure smooth and safe operation of opening and closing the door.

5. Debugging and testing:

(1) Debugging the door body to ensure smooth operation and no stagnation.

(2) Test the transmission system to ensure that the power transmission is smooth and there is no abnormal noise.

(3) Test the control system to ensure that all functions are normal.

Precautions

1. Safety first: During the installation process, pay attention to safety and avoid injury.

2. Follow the manufacturer's guidance: follow the installation guide provided by the manufacturer, and do not change the installation steps at will.

3. Check the size: ensure that the size of the door opening matches the size of the door body to avoid problems caused by improper installation.

4. Check the accessories: Before installation, check whether the door body and accessories are intact and whether the models match.

5. Debugging and testing: After the installation is completed, debugging and testing should be carried out to ensure that the functions are normal.

6. Maintenance: After the installation is completed, the cold storage chain door should be regularly maintained to ensure normal operation。

Common problems and solutions

1.Problem: The door does not run smoothly.

Solution: Check whether the chain is loose and adjust the transmission to ensure smooth power transmission.

2. Problem: There is a stuck phenomenon in the process of opening and closing the door.

Solution: Check whether the guide rails, bearings and other parts are worn out, and replace or repair.

3. Problem: The control system fails.

Solution: Check whether the electrical control box, sensors and other components are normal, and repair or replace them.

The installation of the cold storage chain door needs to follow certain steps and precautions, through the introduction and illustration of this article, I hope that readers can better understand the installation process of the cold storage chain door, successfully complete the installation work, in the process of use, but also regular maintenance, to ensure the normal operation of the cold storage chain door.

In the actual operation process, if you encounter problems, you can contact the manufacturer or professionals for consultation and maintenance, safety first, to ensure personal safety in the process of installation and use.