Pictures of sliding door motor wiring

As a modern form of doors and windows, the sliding door is widely used in a variety of building environments, the smooth operation of the sliding door is inseparable from the motor drive system, the correct wiring of the motor is directly related to the normal operation of the sliding door, this article will introduce the wiring process of the sliding door motor in detail, supplemented by clear pictures, to help readers better understand and master.

Preparation

Before wiring the sliding door motor, the following preparations need to be made:

1. Understand the specifications and models of the sliding door motor, so as to choose the correct wiring method.

2. Prepare necessary tools, such as screwdrivers, wire strippers, multimeters, etc.

3. Make sure the power supply has been disconnected to avoid the risk of electric shock.

4. Prepare the wires, junction boxes and other accessories required for wiring.

Sliding door motor wiring steps

1. Identify the motor wiring port

It is necessary to identify the wiring port of the sliding door motor, and there will be a clear port identification on the motor, such as L1, L2, etc., to ensure that the port identification is accurate.

2. Strip the wire and prepare for wiring

Use wire strippers to strip the wire insulation layer to a certain length to expose the copper wire inside, pay attention to the stripping length should be moderate, not too long or too short.

3. Wiring

Insert the exposed copper wire into the corresponding port of the motor, make sure that the copper wire is in good contact with the port,

 and you can use a screwdriver and other tools to fix the copper wire to prevent it from loosening.

4. Check the wiring

Check whether the wiring is firm and whether there is a short circuit or open circuit, you can use a multimeter to perform voltage and resistance tests to ensure that the wiring is correct.

5. Restore the power supply and test

After making sure that the wiring is correct, restore the power supply and conduct a test to observe whether the sliding door runs smoothly and whether there is any abnormal sound or phenomenon.

Picture display of sliding door motor wiring

Precautions

When wiring the sliding door motor, you need to pay attention to the following:

1. Make sure the power supply has been disconnected to avoid the danger of electric shock.

2. When wiring, make sure that the copper wire is in good contact with the port, and avoid loose or virtual connection.

3. Pay attention to avoid short circuit or open circuit during the wiring process.

4. After the wiring is completed, the voltage and resistance test should be carried out to ensure that the wiring is correct.

5. When restoring the power supply and testing, it is necessary to observe whether the operation of the sliding door is smooth and whether there is any abnormal sound or phenomenon.

6. If you do not have relevant electrical knowledge, it is recommended to ask a professional to carry out the wiring operation.

Common problems and solutions

1. The current is unstable after wiring

Solution: Check whether the wiring is secure, whether there is a short circuit or open circuit, recheck and tighten the wiring.

2. There is an abnormal sound when the sliding door is running

Solution: Check whether the motor and guide rail are well lubricated, check whether the wiring is loose or virtual, if the problem still exists, it is recommended to contact professional maintenance personnel for maintenance.

The wiring of the sliding door motor is a key step to ensure the normal operation of the sliding door, this article introduces the wiring process of the sliding door motor in detail, supplemented by clear pictures, hoping to help readers better understand and master, when wiring the operation, we must pay attention to safety, if we do not have relevant electrical knowledge, it is recommended to ask professionals to wiring, when encountering problems, do not deal with it blindly, it is recommended to contact professional maintenance personnel in time, through the correct wiring and operation, to ensure the smooth operation of the sliding door, and bring convenience to life.