Huajie cold storage door commissioning

Overview of cold storage doors

Cold storage door is an important part of cold storage, its design needs to meet the requirements of heat preservation, safety, convenience, etc., Huajie cold storage door has a wide variety, including manual door, electric door, fast rolling door, etc., different types of cold storage doors will have different technical requirements and precautions in the commissioning process.

The commissioning process of the cold storage door

1. Preliminary preparation

Before the commissioning of the cold storage door, it is necessary to make full preparations and confirm that the commissioning tools are complete, including electric pens, multimeters, screwdrivers, etc.; Ensure the safety of the debugging environment, such as checking whether the power supply is stable and whether the site is clean, etc.; Check the model and specification of the cold storage door to ensure that it is consistent with the design scheme.

2. Debugging process

(1) Door installation inspection: check whether the door body is vertical and whether the fixing screws are firm to ensure that the door body can be opened and closed normally.

(2) Electrical connection: According to the design plan, connect the power supply, motor, sensor and other electrical components to ensure that the wiring is correct.

(3) Functional test: Conduct functional tests on the cold storage door, including opening and closing speed, force, signal feedback, etc., to ensure that the functions are normal.

(4) Safety performance test: test the safety performance of the cold storage door, such as emergency stop function, anti-pinch function, etc., to ensure the safety of personnel.

(5) Performance optimization: According to the test results, adjust and optimize the cold storage door to improve the performance.

Technical details

1. Debugging of the door body

In the process of debugging, it is necessary to use tools such as a level ruler and a line pendant for inspection and calibration, and it is also necessary to pay attention to the sealing performance of the door body to ensure the insulation effect.

2. Debugging of electrical components

The debugging of electrical components mainly includes the connection and testing of power supply, motor, sensor and other components, in the connection process, it is necessary to ensure that the wiring is correct, to avoid short circuit or open circuit, in the test process, it is necessary to check whether the motor runs smoothly, whether the sensor is sensitive, etc.

3. Functional and performance testing

The functional test mainly includes the speed, force, signal feedback, etc., in the test process, it is necessary to verify one by one according to the design scheme and industry standards, the safety performance test mainly includes the emergency stop function, anti-pinch function, etc., to ensure that the operation can be quickly stopped in an emergency, to avoid casualties, and the performance optimization mainly includes fine-tuning the speed and force of the door opening and closing to improve the operation efficiency and comfort.

Precautions

1. Safety first: In the process of commissioning, it is necessary to strictly abide by the safety operation procedures to ensure the safety of personnel.

2. Details determine success or failure: In the debugging process, it is necessary to pay attention to every detail to ensure that the debugging results meet expectations.

3. Follow the design plan: In the process of commissioning, the design plan and industry standards should be followed, and should not be changed at will.

4. Timely feedback: In the process of debugging, if any abnormal situation is found, it needs to be fed back and dealt with in time.

Huajie cold storage door commissioning is an indispensable part of the construction of cold chain logistics facilities, this article introduces in detail the overview, commissioning process, technical details and precautions of the cold storage door, hoping to provide useful reference for relevant practitioners, in actual operation, it is necessary to strictly abide by the safety operation procedures, pay attention to every detail, and ensure that the performance and safety of the cold storage door meet the requirements.