Coating flexible door operation procedures
Preparation
Before painting flexible gates, the following preparations need to be made:
1. Site preparation: ensure that the working site is clean, dry, well ventilated, and free of dust and sundries.
2. Material preparation: Prepare the required coatings, thinners, tools, etc., to ensure that the quality of the materials meets the requirements.
3. Equipment inspection: check whether the coating equipment (such as spray gun, agitator, etc.) is in good condition to ensure normal operation.
4. Safety protection: wear protective clothing, masks, gloves, etc. to ensure the safety of staff.
Coating flexible door operation procedures
1. Pretreatment:
(1) Cleaning: Clean the surface of the flexible door to remove impurities such as oil and dust.
(2) Inspection: Check whether there are defects on the surface of the gate, such as dents, scratches, etc., and repair them in time.
(3) Grinding: Polishing the surface of the gate to make it smooth and enhance the adhesion of the coating.
2. Coating primer:
(1) Stirring: Stir the primer evenly according to the requirements of the paint manual.
(2) Painting: Use a spray gun or brush to evenly apply the primer to ensure that the coating thickness is consistent.
(3) Drying: According to the drying time of the primer, wait for the primer to dry completely.
3. Coating topcoat:
(1) Color selection: according to customer needs, choose the appropriate topcoat color.
(2) Stirring: Stir the topcoat evenly, if necessary, add thinner to adjust the viscosity.
(3) Painting: Use a spray gun or brush to evenly apply the topcoat to ensure that the coating is smooth and flawless.
(4) Drying: According to the drying time of the topcoat, wait for the topcoat to dry completely.
4. Inspection and repair:
(1) Inspection: Check whether the coating is uniform and flawless, and if necessary, local repairs can be carried out.
(2) Repair: repair the coating defects to ensure the quality of the coating.
5. Post-processing:
(1) Cleaning: Clean up the work site and keep it tidy.
(2) Maintenance: Maintain the painted gate to prevent damage to the coating.
Precautions
1. Operate in strict accordance with the requirements of the coating manual to ensure the quality of coating.
2. Wear protective clothing, masks, gloves, etc. to ensure the safety of staff.
3. Keep the workplace clean, dry and well ventilated.
4. During the painting process, pay attention to fire prevention and explosion prevention to avoid accidents.
5. During the drying of the coating, avoid touching or polluting the coating, so as not to affect the quality of the coating.
6. If there is a coating defect, repair it in time to ensure the quality of the coating.
7. After the painting is completed, the gate is maintained to prevent the coating from being damaged.
Coating flexible door is an important part of the production process of flexible door, its quality directly affects the overall effect and service life of the door, this article introduces in detail the operation procedures of the coating flexible door, including preparation, coating process, precautions, etc., to ensure product quality and safe production, in the actual operation process, should be carried out in strict accordance with the operating procedures to ensure the quality of the coating, improve the service life of the flexible door.
Recommended Products
up to dateAzores Automatic Door Accessories
- High Speed Door Zippers Industrial Door Zippers
- Safety Beam Sensor Use for Automatic Door
- Wireless Hand Sensor Switch For Automatic Door
- Hospital Door Foot Sensor
- Automatic Sliding Door System Wireless Touch Press Switch
- Automatic Sliding Door IP65 Waterprooft Wireless Hand Press Switch
- Automatic Door Microwave Sensor
- Reflective Type Infrared Detector
- Automatic High Speed Door Infrared Radar Sensor CNB-204G
- Aluminum Alloy Wind Section For PVC rapid roller shutter door
- Aluminum Bottom Section For PVC high speed rolling shutter door
- Good Quality Door Hardware Strip Brush for High-speed Door Rail
- High Speed Door Fast Door Servo Motor Permanent Magnet AC-Synchronous Servo Motor with Worm Reductio