Installation video of an electric sliding door

Preparation

Before starting to install the electric sliding door, it is necessary to make sufficient preparations, confirm the environmental and safety conditions of the installation site, ensure the supply of infrastructure such as power supply and water source, prepare the required tools and materials, such as power tools, screwdrivers, expansion screws, sealants, etc., ensure that the selected electric sliding door matches the installation environment, and check the integrity of the door body, motor, track and other components.

Installation Steps

1. Determine the installation position: according to the actual needs, determine the installation position of the electric sliding door to ensure that the door body is perpendicular to the wall and the track is horizontal.

2. Install the track: mark the position of the track on the door according to the size provided by the manufacturer, and use the expansion screw to fix the track on the door to ensure that the track is firm.

3. Install the door body: put the door body into the track, ensure that the door body and the track are closely fitted, and adjust the position of the door body to make it parallel to the track.

4. Install the motor and control system: according to the wiring diagram provided by the manufacturer, connect the motor with the power supply, and install the control system, such as remote control, sensor, etc.

5. Debugging and testing: After ensuring that all components are installed, debugging and testing are carried out to check whether the operation of the door body is stable, whether the motor is working normally, whether the control system is sensitive, etc.

Precautions

1. During the installation process, be sure to follow the installation instructions and wiring diagram provided by the manufacturer to ensure the correct wiring of the motor.

2. Pay attention to safety during installation to avoid accidental injury.

3. When adjusting the position of the door body, it is necessary to ensure that the door body is parallel to the track to avoid jamming or damage during operation.

4. In the process of debugging and testing, it is necessary to check whether the operation of the door body is stable, whether the motor is working normally, whether the control system is sensitive, etc., if abnormal conditions are found, they should be dealt with in time.

5. After the installation is completed, the acceptance should be carried out to ensure the normal operation of the electric sliding door.

The installation of electric sliding doors requires certain professional knowledge and skills, if you encounter problems during the installation, it is recommended to seek the help of professional engineers, I hope this article and installation video tutorial can help you, I wish you a smooth installation!

Common problems and solutions

1. Question: The electric sliding door is not running smoothly?

Answer: It may be caused by the door body and the track is not tightly attached or the track is not level, you can adjust the position of the door body to ensure that the door body and the track are tightly fitted, and check the levelness of the track.

2. Question: The motor works abnormally or is noisy?

Answer: It may be caused by incorrect wiring of the motor or damage to the internal parts of the motor, check the wiring of the motor, if there is a problem and need to re-wire, if the problem is still not solved, it is recommended to contact the manufacturer or professional engineer for maintenance.

3. Question: The remote control can't control the electric sliding door?

Answer: It may be caused by the low battery of the remote control or the signal interference between the remote control and the receiver, first check the battery level of the remote control, if the battery is low, you need to replace the battery, if the problem is still not solved, try to adjust the position or direction of the remote control to avoid signal interference.